Hand Tools
A91079: Mini Tie-Lok® Tool
For applying 0.177” wide smooth ID Mini Tie-Lok® ties for cable bundling, hose bundling and identification ...
A92079: Tie-Lok II® Tool
Applies 1/4” wide smooth ID Tie-Lok® ties used in cable bundling, hose bundling, CV boot installation and ...
A94079: 1/4″ ULTRA-LOK® Tool
Applies 1/4" Ultra-Lok® ties. Locks tie with patented Ultra-Lok cut-off for increased loop tensile strength. ...
AE2009: Cable Tie Tensioner
Used for tensioning BAND-IT® cable ties. Use with: BAND-IT Ties
C00169: Standard Banding Tool
BAND-IT’s standard tool for use on band widths of 1/4″ to 3/4″ (.015″ – .030″ ...
C00269: Junior® Preformed Clamp Tool
Use to apply Jr.® Preformed clamps and BAND-IT Jr.® Smooth ID Clamps. Tool performs best when used in a vice.
C00369: Heavy Duty Banding Tool
A heavy duty version of the C00169: Standard Banding Tool tool. Primarily designed for thicker materials and is ...
C07569: Bantam Tool
Compact, lightweight, ratchet action tool with built in cutter. Use with Valustrap, BAND-IT Ties, PPA coated ...
C08569: Bantam Strapping Tool
Light duty ratchet tool designed for palletizing and packaging. Similar to the C07569.
C40099: Rachet Tool
Designed for the band and buckle systems excelling in palletizing and general banding. This tool works best on ...
DS1099: Nicopress Oil Well Hand Tool
Engineered for field conditions, Nicopress toggle-action tools are manufactured from alloyed forged steel with ...
G40269: Giant Banding Tool
The G40269 is the strongest BAND-IT hand tool. This tool is designed for use with ¾", 1", 1-¼" width X .044" ...
J00169: Junior® Clamp Adapter
BAND-IT preformed clamps must be applied with the BAND-IT® Tool C00169: Standard Banding Tool and this Jr® ...
J02069: Pok-It II Tool with Cutter
Compact design and ease of use to install 3/16″ – 3/8″ band and buckle and BAND-IT Jr.® clamps. ...
J05069: Junior® Heavy Duty Adapter
Used to install Junior® Smooth ID Preformed Clamps for hose assembly when a vice is not available. Use only with ...
K50289: Ball-Lok Tool
Install Ball-Lok and Ball-LoktTM stainless steel ties (up to 7.9mm wide) quickly and easily with the lightweight, ...
M50389: Multi-Lok Hand Tool
Quickly, easily and consistently applies any size Multi-Lok ties. Simply adjust the Multi-Lok tool for the ...
S03869: Center Punch Tool
Easy to use ratchet drive can be switched to use either the 3/8″ wide or 5/8″ wide slots of this ...
T30069: Center Punch Tool
Used to apply BAND-IT® 3/8" and 5/8" Center Punch Clamps, 201 Stainless Steel Band and Galvanized Carbon Steel ...
TL3800: Tie-Lok Tool®
Specifically designed to install 3/8" wide Tie-Lok® stainless steel ties. Repeatable, controlled tie tension. ...
XE9229: Tensioning Tool
Tensions and cuts off Ball-Lok, Ball-Lokt™ and Multi-Lok ties up to 12mm wide. Use regardless of material or ...